24-196499-P - Bilstein Front 5100 Series Shocks (10+ 4Runner & 10+ FJ Cruiser)

24-196499-P Front height Adjustable 5100 Bilstein Shocks (10+ 4Runner & 10+ FJ Cruiser)

Bilstein B8 5100 (Ride Height Adjustable) shock absorbers are designed for trucks and SUV's with a front OE coilover style suspension. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.5 inches of front lift (depending on application). The monotube shock absorbers feature a 46mm digressive piston a with self-adjusting deflective disc valve setting. Bilstein B8 5100 (Ride Height Adjustable) shock absorbers provide increased wheel travel and improved handling. Utilizing a B8 5100 (Ride Height Adjustable) shock absorber is the easiest way to level out your vehicle.

Bilstein Zinc plated 5100 Height adjustable front shocks.

• 4 lower spring cup clip positions allow the front to be lifted for leveling in increments of approximately 0, .85", 1.75" and 2.5" average lift.  
• Improved ride & control on/off road.
• Fits 10-14 FJ, & 10 & Up 4Runner. 
• Sold as a pair.

NOTE: Upper bushings and washers are not included from Bilstein in this part number, order separately if needed.

Collapsed Length (IN): 17.58
Extended Length (IN): 22.48
Finish: Zinc Plated
Reservoir: No
Body Design: 46mm ID Snap Ring Grooved Body (Coilover)

• 4 lower spring cup clip positions allow the front to be lifted for leveling in increments of approximately 0, .85", 1.75" and 2.5" average lift.  
• Improved ride & control on/off road.
• Fits 10-14 FJ, & 10 & Up 4Runner. 
• Sold as a pair.

NOT RECOMMENDED FOR USE WITH SPACERS OR LIFT COILS UNLESS LOWEST (STOCK) SETTING IS USED.

NOTE: Upper bushings and washers are not included from Bilstein in this part number, order separately if needed.

Collapsed Length (IN): 17.58
Extended Length (IN): 22.48
Collapsed Length (MM): 446.5
Extended Length (MM): 571.1

Finish: Zinc Plated
Reservoir: No
Body Design: 46mm ID Snap Ring Grooved Body (Coilover)